Application management
We take over the day-to-day running of your RHI account and keep your application file complete and current.
Non-Domestic RHI · UK
Your RHI accreditation, audit ready.
BeauMonte Energy keeps Non-Domestic RHI sites audit ready all year round: keeping records current, handling amendments with Ofgem, updating schematics and managing fuel and service data. We also supply MultiHeat heaters and heat recovery units and Akvaterm accumulator tanks, and install complete poultry house heating systems.
Experience you can rely on
Hundreds of commercial biomass installations, taken from application to accreditation.
500commercial poultry house biomass installations managed, each with a successful RHI application
199 kW–1 MWrange of system sizes, on sites UK-wide
2,500+MultiHeat heaters installed
RHI account management
Everything your accreditation depends on, handled in one place
RHI payments run for years and depend on your records standing up to an Ofgem audit. We manage the paperwork so a missed declaration, a gap in fuel records or an out-of-date drawing doesn't put your payments at risk.
Amendments & changes
Changes of ownership, equipment or contact details, submitted to Ofgem correctly and followed through.
Schematic drawings
Updated system schematics that match what is actually installed in your plant room.
Fuel database
Fuel deliveries and supplier evidence recorded and organised, ready for any audit or query.
Service database
Boiler service records tracked, so maintenance history is always to hand.
Audit ready
Your file is kept ready for inspection at any time, and if an audit is called we help you prepare and respond.
Audit ready
If Ofgem audited your site tomorrow, would your file stand up?
Audits check that what is on paper matches what is in the plant room, and that your records cover every quarter you have been paid for. Gaps found at audit can mean payments are suspended or reclaimed. We keep every part of the file current, so an audit is a formality rather than a scramble.
If an audit is called, we pull the file together, help you prepare for the visit, and work through any actions that come out of it.
What an auditor checksStatus
Accreditation details match the installed equipmentKept current
Schematic drawing matches the plant roomKept current
Heat meter readings and meter recordsKept current
Fuel receipts and sustainability evidenceKept current
Boiler service and maintenance historyKept current
Annual declarations and Ofgem correspondenceKept current
Second-hand RHI boilers & tariffs
Buying or selling an RHI-accredited boiler?
An accredited installation carries its tariff and its obligations with it. We help buyers and sellers understand what they're taking on and keep the accreditation intact through the handover.
- Check the accreditation, tariff and remaining payment period before you commit
- Review the site file for gaps in fuel, meter or service records
- Handle the change-of-ownership notification and updated details
- Update schematics if the boiler is moved or the system is altered
- Carry on managing the account after the sale
UK supplier
Heating and heat recovery
Efficient, indirect heating and heat recovery for poultry and livestock buildings, available as supply only, supply and fit, or a full design, supply and fit package.
Better heat for a better shed
Direct fired gas heaters burn their fuel inside the shed. Every cubic metre of gas burnt adds CO₂ and water vapour to the air the birds breathe, which means wetter litter, more ammonia, and more ventilation to clear it, sending the heat you paid for straight out of the fans.
Indirect heating keeps combustion outside the living space. Hot water units and indirect fired gas heaters deliver clean, dry heat with no fumes, no added moisture and no open flame. Litter stays drier, ammonia and foot pad problems drop, and minimum ventilation can be kept low, especially in the first days of a crop.
Add heat recovery and the savings grow. Heat exchangers take the warmth out of the stale air you have to extract and use it to preheat the fresh air coming in, so far less fuel is needed to hold the right temperature.
- Dry heatNo water vapour from combustion, so drier litter
- Clean airNo CO₂ or combustion gases inside the shed
- Even temperatureWarm air spread evenly, corner to corner
- Less ventilationLess heat lost through the fans
- Healthier birdsLower ammonia and fewer foot pad problems
Significant savings
What MultiHeat equipment can save
50%+saving on your heating bill with a SwitchSuperior or X changer heat exchanger
up to 80%heat recovery efficiency, taking the warmth from extracted air to preheat the fresh air coming in
up to 30%lower energy bills from a SnookSuperior indirect fired heater compared with direct gas heaters, with a return on investment in 2 to 3 years
Beyond the heating bill
Heat exchangers also make a big difference to the climate in the shed, and farmers don't always think of this straight away. It's hard to put a price on, but it matters enormously:
- Drier litter
- Less ammonia (NH₃)
- Fewer health problems
- Less need for antibiotics
- Better feed conversion (FCR)
Figures from MultiHeat International. Actual savings depend on the building, flock and climate. We'll work out the figures for your site.
For MultiHeat and Akvaterm equipment, choose how much you want us to handle:
Supply only
The right equipment, sized for your building and delivered to site, ready for your own installer.
- Sizing advice
- Equipment supplied
Supply & fit
You know what you need. We supply it, install it and commission it.
- Sizing advice
- Equipment supplied
- Installation & commissioning
Design, supply & fit
We take it from a blank sheet: survey, system design and schematic, then supply and installation.
- Site survey & heat load
- System design & schematic
- Equipment supplied
- Installation & commissioning
Designed and built in the Netherlands by MultiHeat International, whose warm water heaters, heat exchangers and indirect fired gas heaters are used on pig and poultry farms around the world.
Heaters
Hot water heater
MultiHeat HW unit
Fed from a central boiler, it spreads dry warm air evenly through six outlets, with an air throw of 15 metres in all directions. No combustion, so no CO₂ or moisture added.
- Output
- 17–110 kW
- Air throw
- 15 m in all directions
- Spread
- ≤0.5 °C
Indirect fired gas heater
SnookSuperior
Brings fresh air into the shed over an air-to-air heat exchanger, warmed by indirect gas heat, for a perfect poultry house atmosphere. Flue gases go outside, so there is no open flame and no CO₂ in the shed. Can replace a 100 or 130 kW direct fired heater.
- 80 kW model
- 8,500 m³/h
- 100 kW model
- 10,500 m³/h
- Throw
- 45 m
Heat recovery
Compact heat exchanger
SwitchSuperior
Swaps stale, CO₂-rich air for fresh air, using the outgoing heat to warm what comes in. Drier litter, lower ammonia, and it adds on to existing ventilation.
- Heating saving
- 50%+
- Efficiency
- up to 80%
- Sizes
- 2,500 · 5,000 · 9,000 m³/h
11,500 m³/h (Inverso)
Balanced ventilation heat recovery
X changer
Larger floor-standing unit with a cross-flow recuperator and self-cleaning filters that use compressed air, not water. Runs alone or alongside MultiHeat heaters.
- Heating saving
- 50%+
- Efficiency
- up to 80%
- Sizes
- 18,000 · 22,500 · 31,000 · 36,000 m³/h
Akvaterm · UK supplier
Thermal storage
An accumulator tank stores heat so your boiler or heat pump can run at its most efficient, steady output instead of cycling on and off, and covers peaks in demand without oversizing the heat source.
Available as supply only, supply and fit, or as part of a full design, supply and fit package.
Energy accumulators · Made in Finland
Akvaterm accumulator tanks
Made in Kokkola, Finland, since 1993, Akvaterm accumulators come in standard sizes from 300 to 10,000 litres or fully customised to your specification. Seamless polyurethane insulation keeps the stored heat where it belongs, and built-in guide pipes keep the water properly stratified.
| Model | Best for | Sizes |
|---|---|---|
| AKVA EK | Oil, wood and pellet boilers, or as a heat pump buffer | 300–10,000 L |
| AKVA GEO | Heat pump systems, with two domestic hot water coils | 300–5,000 L |
| AKVA GEO SOLAR | Heat pump and solar thermal together | 300 L upward |
| AKVA NERO | Boilers, with high-efficiency insulation and an LK MAX finned copper hot water coil | 300–5,000 L |
| AKVA SOLAR | Solar thermal systems | 300 L upward |
| AKVA PRO | Custom tanks: cold storage, equalising, heat recovery and industrial use, 1.5–10 bar | Made to order |
Standard accumulator
AKVA EK
The all-rounder for boiler systems. 100 mm seamless insulation, 3 bar rating, a domestic hot water coil as standard and 2" couplings for immersion heaters.
- Sizes
- 300–10,000 L
- Pressure
- 3 bar
Heat pump & solar
AKVA GEO · NERO · SOLAR
Models built around the heat source: twin hot water coils for heat pumps, extra coils for solar, or the NERO's extra-efficient insulation and full-length finned coil.
- Sizes
- 300–5,000 L
- Heat sources
- Heat pump, solar, boiler
Customised tanks
AKVA PRO
Built to your exact specification: volume, dimensions, coils, baffle plates, flanges and couplings, in carbon steel or stainless steel.
- Pressure
- 1.5–10 bar
- Material
- Steel or AISI 304 / 316 / 444
Poultry house heating
Complete heating installs for poultry houses
Broilers and chicks need steady, even warmth from day one. We design and install complete heating systems for poultry houses, matched to the site: hot water systems fed from a central boiler, direct or indirect fired gas heaters, and heat recovery to cut fuel use.
Hot water heater unitsDirect fired gas heatersIndirect fired gas heatersHeat recovery unitsBoilers & accumulator tanksControls
- Site surveyWe look at the house size, flock type and available fuel, and work out the heat load you need.
- System designWe recommend hot water or gas fired heating to suit the site, then plan heater positions for even temperatures across the whole house, with a schematic drawing.
- SupplyMultiHeat heaters and heat recovery units supplied direct, with Akvaterm tanks, pipework, gas connections and controls as the system needs.
- Installation & commissioningFitted, filled, tested and set up, with a walkthrough of the controls before your first flock goes in.
- AftercareOngoing support and servicing records kept, so the system keeps running flock after flock.
Get in touch
Tell us about your site
Whether you need help with an existing RHI account, advice on a second-hand boiler, a poultry house heating install, or a quote for MultiHeat or Akvaterm equipment, get in touch and we'll come back to you.
- Phone
- +44 (0)7881 204071
- Company
- BeauMonte Energy Ltd
Company no. 12504310
Registered in England & Wales